Measurement of I-V and P-V Characteristics of Solar Panels Under Partial Shading Conditions

##plugins.themes.academic_pro.article.sidebar##

Available on-line since May 31, 2022
https://doi.org/10.46574/motivection.v4i2.116
Download
PDF (Bahasa)
Statistic
Read Counter : 752
Download : 882
Vol 4 No 2 (2022): Motivection : Journal of Mechanical, Electrical and Industrial Engineering

##plugins.themes.academic_pro.article.main##

Hanif Hazman
Teknik Elektro Industri, Universitas Negeri Padang
Asnil Asnil
* Corresponding author: asnil81@ft.unp.ac.id
[1] Departemen Teknik Elektro, Fakultas Teknik, Universitas Negeri Padang; [2] Center for Energy and Power Electronics Research, Universitas Negeri Padang

Abstract

Some factors that affect the solar panels in producing electrical energy are temperature and temperature, another important point is the shadows that block the sunlight to reach the surface of the solar panels. This study aims to analyze the characteristics of the solar panel configuration with various levels of shadows that block the sunlight. The method used is a simulation of the current and voltage characteristics produced by several solar panel configurations. The configurations used are Series Parallel (SP), Total Cross Tied (TCT), Triple Tied (TT), Bridge Link (BL) and Honey Comb (HC). The results showed that the electrical energy generated by the SP, TCT, TT, BL and HC configurations respectively were 501.9 W, 517.5 W, 508.1W, 502.5W, 507.2W. Thus it is known that TCT has the maximum results.


Beberapa faktor yang mempengaruhi efisiensi dari panel surya untuk menghasilkan energi listrik adalah suhu dan temperature, factor lain yaitu bayangan yang menghalangi sinar matahari. Penelitian ini bertujuan untuk melihat karakteristik dari konfigurasi pemasangan panel surya dengan berbagai tingkat bayangan yang terjadi. Metode yang digunakan adalah simulasi karakteristik arus dan tegangan yang dihasilkan oleh beberapa konfigurasi panel surya. Konfigurasi yang digunakan yaitu Series Parallel(SP), Total Cross Tied (TCT), Triple Tied (TT), Bridge Link (BL) dan Honey Comb (HC). Hasil penelitian menunjukkan energi listrik yang dihasilkan pada konfigurasi SP, TCT, TT, BL dan HC secara berurut adalah 501.9 W, 517.5 W, 508.1W, 502.5W, 507.2W. Dengan demikian TCT memiliki hasil yang paling baik.

##plugins.themes.academic_pro.article.details##

License and Copyright
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c): Hanif Hazman, Asnil Asnil (2022)
How to Cite
Hazman, H., & Asnil, A. (2022). Measurement of I-V and P-V Characteristics of Solar Panels Under Partial Shading Conditions. MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, 4(2), 99-114. https://doi.org/10.46574/motivection.v4i2.116

References

[1] M. K. Usman, “Analisis intensitas cahaya terhadap energi listrik yang dihasilkan panel surya,” vol. 9, no. 2, pp. 52–58, 2020.
[2] Asy’ari, Hasyim, Jatmiko, and Angga, “Intensitas cahaya matahari terhadap daya keluaran panel sel surya,” pp. 52–57, 2013.
[3] P. R. Satpathy and S. Jena, “Comparative study of interconnection schemes of modules in solar PV array network,” no. April, 2017, doi: 10.1109/ICCPCT.2017.8074185.
[4] K. Lappalainen and S. Valkealahti, “Effects of the size of PV arrays on mismatch losses under partial shading conditions caused by moving clouds,” no. September, 2013.
[5] K. Abdulmawjood, S. Alsadi, S. Member, and S. S. Refaat, “Characteristic study of solar photovoltaic array under different partial shading conditions,” IEEE Access, vol. PP, p. 1, 2022, doi: 10.1109/ACCESS.2022.3142168.
[6] P. Makhija, “Performance analysis of solar MPPT techniques under partial shading condition,” vol. 9, no. 08, pp. 408–413, 2020.
[7] I. R. Balasubramanian, S. I. Ganesan, and N. Chilakapati, “Impact of partial shading on the output power of PV systems under partial shading conditions,” no. August 2013, pp. 657–666, 2014, doi: 10.1049/iet-pel.2013.0143.
[8] A. Bennani, B. Abdelghani, H. Ben, and A. Sethom, “Modeling PV installations under partial shading conditions,” SN Appl. Sci., vol. 2, no. 4, pp. 1–9, 2020, doi: 10.1007/s42452-020-2458-0.
[9] K. S. Tey, S. Mekhilef, and S. Member, “Modified incremental conductance algorithm for photovoltaic system under partial shading conditions and load variation,” vol. 61, no. 10, pp. 5384–5392, 2014.
[10] E. Koutroulis and F. Blaabjerg, “A new technique for tracking the global maximum power point of PV arrays operating under partial shading conditions,” pp. 1–7.
[11] R. N. Raghavan, “Improving performance of photovoltaic panel by reconfigurability in partial shading condition,” no. February, 2020, doi: 10.1117/1.JPE.10.042004.
[12] G. Varshney, “Effect of partial shading on characteristics of PV panel using simscape effect of partial shading on characteristics of PV panel using simscape amardeep chaudhary,” no. October, 2015.
[13] A. Kumar and Y. K. Chauhan, “Experimental analysis of proposed SP-TCT , TCT-BL and CT-HC configurations under partial shading conditions,” no. April 2018, 2016, doi: 10.1109/POWERI.2016.8077323.
[14] V. M. J. Manoj, M. J. Kavitha, and M. S. Mythili, “A method to detect photovoltaic array faults in pv systems a method to detect photovoltaic array faults in pv systems,” pp. 20–24, 2018.
[15] Asnil, Krismandinata, I. Husnaini, and E. Astrid, “Characteristics of photovoltaic modules in various configurations for partial shading,” vol. 99, no. 22, pp. 5287–5299, 2021.