Determination of Conventional Lathe Machine Maintenance Action with the Failure and Effect Analysis Method at PT. Raja Ampat Indotim

##plugins.themes.academic_pro.article.sidebar##

Available on-line since Sep 3, 2022
https://doi.org/10.46574/motivection.v4i3.155
Download
PDF (Bahasa)
Statistic
Read Counter : 304
Download : 241
Vol 4 No 3 (2022): Motivection : Journal of Mechanical, Electrical and Industrial Engineering

##plugins.themes.academic_pro.article.main##

Alif Imam Utomo
* Corresponding author: 1810631150183@student.unsika.ac.id
Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang
Deri Teguh Santoso
Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang
Eka Yulianty
Program Studi Teknik Industri, Universitas Singaperbangsa Karawang

Abstract

Over time, the condition of conventional lathes used for the production process at PT. Raja Ampat Indotim experienced a decrease in ability and function which would result in losses. However, the treatment measures carried out in PT. RAI is considered to be still ineffective, because all activities are carried out by holding treatment actions after the occurrence of damage or have no prior plans for treatment actions. So the purpose of this study is to discuss the determination of treatment actions using the Failure Mode and Effect Analysis method. 27 types of failures were obtained in conventional lathes with a maximum and minimum RPN value of 240 and 10. In order for treatment measures to be carried out effectively, treatment is focused on 8 types of failures with preventive treatment measures and also corrective treatment measures.


Seiring berjalannya waktu, kondisi mesin bubut konvensional yang digunakan untuk proses produksi pada PT. Raja Ampat Indotim mengalami penurunan kemampuan dan fungsi yang akan mengakibatkan kerugian. Namun, tindakan perawatan yang dilakukan di PT. RAI dinilai masih kurang efektif, dikarenakan semua perawaatan yang dilakukan dengan mengadakan tindakan perawatan setelah terjadinya kerusakan atau tidak mempunyai rencana sebelumnya untuk tindakan perawatan. Maka tujuan penelitian ini adalah membahas tentang penentuan tindakan perawatan dengan metode Failure Mode and Effect Analysis. Didapatkan 27 jenis kegagalan yang terjadi pada mesin bubut konvensional dengan nilai RPN maksimal dan minimum sebesar 240 serta 10. Supaya tindakan perawatan dapat dilakukan secara efektif, maka penanganan difokuskan pada 8 jenis kegagalan dengan tindakan perawatan preventif dan juga tindakan perawatan korektif.

##plugins.themes.academic_pro.article.details##

License and Copyright
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c): Alif Imam Utomo, Deri Teguh Santoso, Eka Yulianty (2022)
How to Cite
Utomo, A., Santoso, D., & Yulianty, E. (2022). Determination of Conventional Lathe Machine Maintenance Action with the Failure and Effect Analysis Method at PT. Raja Ampat Indotim. MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, 4(3), 283-296. https://doi.org/10.46574/motivection.v4i3.155

References

[1] S. Nakajima, Introduction to TPM TOTAL PRODUCTIVE MAINTENANCE, Cambridge: Productivity Press, Inc, 1988.
[2] A. Susilo, R. I. Rohimat and H. Husniah, "Analisis Kegagalan Operasiional Mesin Chiller dengan Metoda FTA dan FMEA," Integrasi Jurnal Ilmiah Teknik Industri, vol. 2, no. 3, pp. 19-29, 2019.
[3] R. I. Yaqin, Z. J. P. Siahaan, Y. E. Priharanto, M. S. Alirejo and M. L. Umar, "Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk: Studi Kasus di KM. Sidomulyo," Jurnal Rekayasa Sistem Industri, vol. 9, no. 3, pp. 189-200, 2020.
[4] I. S. Haq, A. Y. Darma and R. A. Batubara, "Penggunaan Metode Failure and Effect Analysis (FMEA) dalam Identifikasi Kegagalan Mesin untuk Dasar Penentuan Tindakan Perawatan di Pabrik Kelapa Sawit Libo," Jurnal Vokasi Teknologi Industri, vol. 3, no. 1, pp. 41-47, 2021.
[5] W. A. Fahrudin, "ANALISIS KEEVEKTIFITASAN MESI BUBUT KONVENSIONAL SEBAGAI USULAN PERBAIKAN DALAM PENERAPAN TOTAL PRODUCTIVE MAINTENANCE DI PT. XINTAI INDONESIA," JITMI, vol. 1, no. 2, pp. 180-188, 2018.
[6] F. Kurniawan, Manajemen Perawatan Industri: Teknik dan Aplikasi Implementasi Total Productive Maintenance (TPM), Preventive Maintenance dan Realibility Centered Maintenance (RCM), Yogyakarta: Graha Ilmu, 2013.
[7] R. K. Moubley, L. R. Higgins and D. J. Wikoff, Maintenance Engineering Handbook Seventh Edition, New York: McGraw-Hill, 2008.
[8] B. Puthilath and R. Sasikumar, "Selection of Maintenane Strategy Using Failure Mode Effect and Critically Analysis," International Journal of Engineering and Innovative Technology (IJET), vol. 1, no. 6, pp. 73-79, 2012.
[9] D. A. Sucipto and D. Herwanto, "Pengendalian Kualitas Proses Rajut dengan 4QC Tools dan Failure Mode and Effect Analysis (FMEA)," MOTIVECTION: Journal of Mechanical Electrical and Industrial Engineering, vol. 4, no. 2, pp. 65-76, 2022.
[10] D. H. Stamatis, Failure Mode and Effect Analysis: FMEA from Theory to Excecution Second Edition, Milwaukee: American Society for Quality, Quality Press, 2003.
[11] B. A. C. Putra, "RISK ASSESSMENT ALAT PRODUKSI GULA CANE KNIFE PADA STASIUN GILINGAN DI PT. X," IJOSH, vol. 7, no. 3, pp. 273-281, 2018.
[12] D. I. Situngkir and G. R. S. Tambunan, "Pengaplikasian FMEA untuk Mendukung Pemilihann Strategi Pemeliharaan pada Paper Machine," FLYWHEEL: JURNAL TEKNIK MESIN UNTIRTA, vol. 5, no. 2, pp. 1-5, 2019.
[13] M. A. Chabibi and D. Andesta, "Usulan Perbaikan Kualitas pada Tangki Air Menggunakan Metode FMEA dan FTA," Jurnal Rekayasa Sistem Industri, vol. 7, no. 2, pp. 1-8, 2022.
[14] F. Suryani, "PENERAPAN METODE DIAGRAM SEBAB AKIBAT (FISH BONE DIAGRAM) DAN FMEA (FAILURE MODE AND EFFECT) DALAM MENGANALISA RESIKO KECELAKAAN KERJA DI PT. PERTAMINA TALISMAN JAMBI MERANG," Journal Industrial Servicess, vol. 3, no. 2, pp. 63-69, 2018.
[15] D. W. Ariani, Pengendalian Kualitas Statistik: Pendekatan Kuantitatif dalam Manajemen Kualitas Statistik (Pendekatan kuantitatif dalam Manajemen Kualitas), Yogyakarta: Andi, 2004.