Effect of Heating Fuel through the Upper Tank Radiator with Copper Pipes Against Torque and Power

##plugins.themes.academic_pro.article.main##

Endrika Wahidri
Erzeddin Alwi
Remon Lapisa

Abstract

In an effort to improve motorcycle performance is done in various ways, one of which fuel warming through upper radiator tank with copper pipe. Before the fuel is mixed with air. Fuel can evaporate and betekanan, so as to accelerate and multiply income mixing fuel and air in the carburetor in hopes of improving engine performance. The test results of heating fuel towards the torque and power of motorcycles 110 cc Honda Vario using dyno test. Indicates that, the fuel warming influence on the torque and power of motorcycles in four steps. The average torque at 6500 rpm engine rounds without a heater of 6.72 Nm with an average torque at 6500 rpm engine using fuel warming through upper radiator tank with copper pipe of 7.07 Nm. With the increased torque of 0.35 Nm or 4.95%. While the average Power without the heater on the engine rpm of 8000 rounds 6.3 HP with average power use of heating fuel through the upper radiator tank with copper pipe of 6.8 HP at 8000 rpm engine rotation. With the increased power of 0.5 or 7.35%.

##plugins.themes.academic_pro.article.details##

How to Cite
Wahidri, E., Alwi, E., & Lapisa, R. (2019). Effect of Heating Fuel through the Upper Tank Radiator with Copper Pipes Against Torque and Power. MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, 1(2), 7-18. https://doi.org/10.46574/motivection.v1i2.4

References

[1] Bondan T. Sofyan. 2010. Pengantar Material Teknik. Jakarta: Salemba Teknika.
[2] Djokosetyardjo, M.J. 2006. Ketel Uap. Jakarta: Pradnya Paramita.
[3] Djunaidi. 2009. “Pemeliharaan Tube\-Side Penukar Kalor Rsg-Gas Jangka Pendek Dan Jangka Panjang”. Pusat Reaktor Serba Guna-BATAN. Kawasan Puspitek Serpong Tangerang : Banten.
[4] Ginting, Raja Ulungan. 1989. Dasar-dasar Termodinamika.Jakarta: P2LPTK.
[5] Honda. (2011). Buku Petunjuk Service. Jakarta: Honda Motor Ahass.
[6] Pulkrabek, Williard. W. 2004. Engineering Fundamental of Internal Combustion Engine. New Jersey: Pearson Prentice-Hall.
[7] Sinambela, Lijan Poltak. 2014. Metodologi Penelitian Kuantitatif. Yogyakarta : Graha Ilmu.
[8] Soedarmo, Hartoto. 2008. Panduan Praktis Merawat Dan Memperbaiki Sepeda Motor. Jakarta: PT. Gramedia Pustaka Utama.
[9] Sugiyono. 2012. Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung : Alfabeta.
[10]Suyanto, Wardan. 1989. Teori Motor Bensin. Jakarta: Proyek Pengembangan Lembaga Pendidikan Tenaga Kependidikan (P2LPTK).
[11]Tenaya, I Gusti Ngurah Putu dkk. 2013. “Pengaruh Pemanasan Bahan Bakar Dengan Media Radiator Pada Mesin Bertipe Injeksi Terhadap Unjuk Kerja Mesin’’. Jurnal Energi dan Manufaktur, Volume 6 No 2. Oktober 2013: 95-202.
[12]Toyota. 1994. Materi Pelajaran Engine Group Step 2. Jakarta: PT. Toyota Astra Motor.